Demon Hot Shot Puck

HOW IT WORK

1-Select a shot type Slap, Snap or Pass.

2-Select a shooting distance 16, 24, 36 or 48 feet. 

3-Tap puck on edge to turn it on. "00" on display. 

4-Shoot puck against a hard surface. 

5-Retrieve puck and see your shot speed. 

6-Puck automatically resets and is ready to be shot again. 



FEATURES

- Impact resistant.

- Water resistant. 

- Indoor/Outdoor use. 

- Four shootings distances to choose from. 

- Three shots types to choose from.

- As accurate as a radar gun. 

- Turns off automatically after one minute of non-use.


HOW TO MAKE CHANGE


If you don’t touch the puck for 1 minute, it turns off!  It is the only time the puck can change settings.  If the puck is “on” you must wait for 1 minute.


Now with the puck “OFF” bang the puck hard on its side 3-times quickly as in (Bang-Bang-Bang).


The puck will scroll a message from right to left on the LCD screen.  It will give one of the following readings:

 

  • Slap 16, Slap 24, Slap 36, Slap 48.

  • Pass 16, Pass 24, Pass 36, Pass 48.

  • Snap 16, Snap 24, Snap 36, or Snap 48.


The setting is now scrolling from right to left on the LCD screen.  Every time you tap the puck once, the setting will change in sequential order: (i.e. tapping it the first time will change it from Snap 16 to Snap 24.  Tap it one more time it changes from Snap 24 to Snap 36, etc.  Finally, when it says Slap 48, it will change back to Snap 16).  When you find the setting you want to use, STOP and wait 2 seconds until the display shows “00”.  The puck is ready to use!


After practice when the puck has turned off, the puck will start with the same setting as you left it.


If you want to check actual setting when the puck is already on, hit the puck on its side 1 time, wait 2 seconds and it shows the current setting.